What Should We Pay Attention To Before And After Using The Rescue Equipment Four-wheeled Fire Fighting Motorcycle?
1. Fasten the safety belt of the Fire Fighting Motorcycle during driving, otherwise the speed limit will be imposed.
2. The regulating valve on the water mist fire extinguishing device cannot be twisted at will, otherwise the pressure will increase, and the belt and the engine will also be damaged.
3. The pump oil is attached to the fire pump by hand, and it is necessary to ensure that there is oil in it at any time, otherwise it is easy to damage the pump.
4. When driving on soft sandy or slippery muddy roads, fire motorcycles should first be switched to four-wheel drive. If the wheel slips or the vehicle is stuck in the bottom, you cannot refuel for more than 3 seconds, and necessary rescue measures should be taken to get the vehicle out of trouble: otherwise, the clutch and belt kit will be seriously damaged.
5. The fire motorcycle must be operated when the vehicle is stationary when switching between 24WD and locking the differential: otherwise, the 24WD conversion motor will be damaged.
6. When switching gears, the fire-fighting motorcycle must be operated in a stationary state. After switching, observe whether the gear display on the instrument panel is in the required gear. After switching in place, do not slam the gas pedal when starting, otherwise the gear will be easily damaged. tooth.
7. Fire Fighting Motorcycles must be cleaned immediately after use in a salty environment. Special note: The vehicle cannot be flushed with sea water, otherwise it will seriously affect the service life of the vehicle.
8. Fire Fighting Motorcycles need to be regularly maintained as required.
