Regarding the adjustment of the brake of the rescue tripod

The detailed introduction of SJY rescue tripod, we have learned from the previous article, this time we will learn some technical knowledge, and see what kind of problems Tiandun's customer service will bring us?

This time, the question for everyone is about the adjustment of the brake of the rescue tripod. You should not understand this question very well, because the brake is a more important part of the tripod, so we have to read the introduction of this issue carefully.

1. Adjust the working length of the rescue tripod spring. Use a wrench to adjust the nut to turn clockwise to compress the main spring to increase its elasticity, and the brake shoe is held tighter when braking.

2. Adjustment of the electromagnetic armature of the brake. Put the lock nut on one hand, use another wrench to drive the square head of the brake spring push rod, and adjust the stroke (stroke) of the electromagnetic armature according to the regulations.

3. Adjust the gap between brake shoe and brake wheel of SJY rescue tripod. Push the electromagnetic armature on the iron core, release the brake during braking, and then adjust the screws to make the left and right brake shoes and the brake wheel have the same clearance.

4. After use, the rescue tripod should be wiped clean, and the steel wire rope should be neatly wound on the reel and stored in a dry place.

Regarding the adjustment of the brake of the SJY rescue tripod, not only do the adjustment, but also other aspects can not be ignored. Do a good job in the overall maintenance of the equipment, and regular inspections can keep the performance of the equipment.